Carry Cages, Baskets & Bottle Cages

Stainless steel bottle cage made with extra stiff 6mm OD tubing.
– Three sets of holes for multi-position mounting
– Weight: 83g
– Semi-polish finish
– Made in Japan

The Bumper Bar is a unique accessory that serves multiple functions; as a hard point for mounting lights, while also acting as a spacer for our range of bar bags, pushing them upwards and away from the front wheel. This is ideal for smaller bikes with a low stack height or where handlebar to tyre clearance is limited.

Made from CR4 Steel with a durable powder coated finish, the Bumper Bar includes a front grille and 30mm slots on the top and bottom that work seamlessly with the retention straps of our bar bags. Also included are 5mm diameter holes on the top and bottom for additional mounting options.

The front is curved to allow the fitting of most lights, where the position out the front of the steerer is ideal for forward visibility.

The Bumper Bar acts as a 3mm headset spacer and is designed to fit all 1 1/8th” steerers.

Weight - 178g

Recommended maximum load:

2.5kg resting on Bumper Bar with support straps around headtube.
0.5kg mounted directly to Bumper Bar.

The Carry Cage is a secure and versatile carrying solution that allows you to easily expand your horizons, whether you’re bikepacking, touring or just exploring.

Working in perfect harmony with Restrap Fork Bags or Fast Straps, the Carry Cage accommodates a huge range of cargo from extra water bottles to camping equipment. Three adjustable mounting points allow the cage to be mounted in a variety of positions on the bike.

The Carry Cage is made from laser cut aluminium and finished with a black powder coating and Restrap branded rubber label.

For guidance on fitting, please follow manufacturer's recommendation for your frame/forks.

Weight - 136g
Max. load: 3kg

 – Steel wire basket

– 15"W x 10"D x 4-3/4"H

– Comes in black or silver

– Original one-length fork mounting struts.

- Also available with adjustable two-piece legs (#1372) or  just the basket alone (#42)

– Made in the USA

– 4.5mm aluminum rod

– Aluminum bolts

– Made in Japan

– 44 grams

– Premium finishes: copper, chrome-plate and Neo Black

This unique rack is designed specifically for wire baskets that don't come with their own mounting hardware. The T-shaped platform may prevent the basket from bending or warping that can sometimes happen to well-used baskets zip-tied to narrow front racks.

The basket (not included) lays on a flat steel plate and bolted securely at three points. 
The platform attaches to the front fork much like other front racks – a tongue extends to the fork crown and two solid struts connect to the fork. If used on a road or CX fork, the struts would connect to the pannier eyelets or the fender eyelets. (Mini-rack mounts might be too high to offer optimum support.) 

– Platform size: 260mm wide x 140mm deep x 30mm deep
– The struts have a lot more width adjustment than on a regular rack, so you can fit roads forks or MTB forks as wide as 160mm. 
– Struts are 390mm long and can be cut down to suit different forks

Stainless steel wire basket great for mounting to a front or rear rack. Low profile for lighter weight and less likely to cause interference with lower set handlebars.
15" x 10" x 2-3/8"

Natural stainless steel or Black finish.
With limited edition painted colours.

5mm tubular stainless steel cage.

A side loading bottle cage allows easier bottle removal and loading on smaller frames and in tight spaces (such as if a frame bag is in use.) Instead of pulling the bottle straight up and out, you pull it to the right or left. 

– Duraluminum construction
– The Eight Moves design has eight mounting slots to allows to be adjusted up and down to make room for another cage or a frame bag, etc. Almost 70mm of adjustment.
– Seven colors
– Bolts not included
– Made in Japan

The "Left" side cage has its opening on the left side when installed on the donwntube. When installed on the seat tube, the opening flips to the right side. If you are getting bottles for both the seat tube and down tube AND want the opening to be on the same sides, get a Right and Left Side Cage.

A side loading bottle cage allows easier bottle removal and loading on smaller frames and in tight spaces (such as if a frame bag is in use.) Instead of pulling the bottle straight up and out, you pull it to the right or left. 

– Duraluminum construction
– The Eight Moves design has eight mounting slots to allows to be adjusted up and down to make room for another cage or a frame bag, etc. Almost 70mm of adjustment.
– Seven colors
– Bolts not included
– Made in Japan

The "Left" side cage has its opening on the left side when installed on the donwntube. When installed on the seat tube, the opening flips to the right side. If you are getting bottles for both the seat tube and down tube AND want the opening to be on the same sides, get a Right and Left Side Cage.

Minimalistic aluminum cargo cage.

Designed to fit standard 64mm bolt-spaced 3-pack mounts.

It has a very low profile, but has an unique 4th mount which means you can choose to mount it higher or lower on the fork and use a strap on the unused mount for extra stability and  to put less stress on your fork bosses.

Duralumin construction. Made in Japan